Vpn Express Wizard - Summary - ZyXEL Communications ZYWALL USG 2000 Manual

Unified security gateway

Hide thumbs Also See for ZYWALL USG 2000:

Table of Contents

The following table describes the labels in this screen.

Table 17 VPN Express Wizard: Step 4

Configuration

4.8.2 VPN Express Wizard - Summary

This summary of VPN tunnel settings is read-only.

Name: Identifies the VPN gateway policy.

Secure Gateway: IP address or domain name of the peer IPSec device.

Pre-Shared Key: VPN tunnel password.

Local Policy: IP address and subnet mask of the computers on the network

behind your ZyWALL that can use the tunnel.

Remote Policy: IP address and subnet mask of the computers on the network

behind the peer IPSec device that can use the tunnel.

ZyWALL USG 2000 User's Guide

This is the name of the VPN connection (and VPN gateway).

This is the WAN IP address or domain name of the remote IPSec router. If

this field displays 0.0.0.0, only the remote IPSec router can initiate the

VPN connection.

This is a pre-shared key identifying a communicating party during a phase

1 IKE negotiation.

This is a (static) IP address and Subnet Mask on the LAN behind your

This is a (static) IP address and Subnet Mask on the network behind the

remote IPSec router.

These commands set the matching VPN connection settings for the

remote gateway. If the remote gateway is a ZLD-based ZyWALL, you can

copy and paste this list into its command line interface in order to

configure it for the VPN tunnel.

You can also use a text editor to save these commands as a shell script file

with a ".zysh" filename extension. Then you can use the file manager to

run the script in order to configure the VPN connection.

See the commands reference guide for details on the commands displayed

in this list.

Click Save to store the VPN settings on your ZyWALL.

Chapter 4 Wizard Setup