Configure Wan Settings - ZyXEL Communications ZyWall USG 300 User Manual

Otherwise, choose PPPoE or PPTP for a dial-up connection according to the
information from your ISP.
Figure 39 WAN Interface Setup: Step 2
The screens vary depending on what encapsulation type you use. Refer to
information provided by your ISP to know what to enter in each field. Leave a field
blank if you don't have that information.
Note: Enter the Internet access information exactly as your ISP gave it to you.

5.2.3 Configure WAN Settings

Use this screen to select to which zone the interface belongs and whether the
interface should use a fixed or dynamic IP address.
Figure 40 WAN Interface Setup: Step 2
• WAN Interface: This is the interface you are configuring for Internet access.
• Zone:
ZyWALL USG 300 User's Guide
Chapter 5 Quick Setup
75