19.7 Firewall Rule Configuration Example
The following Internet firewall rule example allows a hypothetical MyService from the WAN
to IP addresses 10.0.0.10 through 10.0.0.15 (Dest_1) on the LAN. You need to configure the
service and address objects before you create a firewall rule.
1 In the Object > Service screen, click the Add icon (
Figure 205 Firewall Example: Object > Service
2 Configure it as follows and click OK.
Figure 206 Firewall Example: Create a Service Object
3 Click Object > Address to display the Address screen. Click the Add icon (
the Address Edit screen.
Chapter 19 Firewall
ZyWALL 1050 User's Guide
) to open the Service Edit screen.
) to open
317