The Nat Add/Edit Screen - ZyXEL Communications ZyWALL USG 2000 User Manual

Chapter 19 NAT

19.2.1 The NAT Add/Edit Screen

The NAT Add/Edit screen lets you create new NAT rules and edit existing ones.
To open this window, open the NAT summary screen. (See
388.) Then, click on an Add icon or Edit icon to open the following screen.
Figure 292 Configuration > Network > NAT > Add
The following table describes the labels in this screen.
Table 98 Configuration > Network > NAT > Add
LABEL
Create new
Object
Enable Rule
Rule Name
390
DESCRIPTION
Use to configure any new settings objects that you need to use in this
screen.
Use this option to turn the NAT rule on or off.
Type in the name of the NAT rule. The name is used to refer to the NAT
rule. You may use 1-31 alphanumeric characters, underscores(
dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Section 19.2 on page
), or
_
ZyWALL USG 2000 User's Guide