Configure A Wan Ethernet Interface; Configure Zones - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 7 Tutorials
• You want to be able to apply security settings specifically for all VPN tunnels so
you create a new VPN zone.
Figure 60 Ethernet Interface, Port Grouping, and Zone Configuration Example

7.1.1 Configure a WAN Ethernet Interface

You need to assign the ZyWALL's ge2 interface a static IP address of 1.2.3.4.
Click Configuration > Network > Interface > Ethernet and double-click the
ge2 interface's entry. Select Use Fixed IP Address and configure the IP addr ess,
subnet mask, and default gateway settings and click OK.
Figure 61 Configuration > Network > Interface > Ethernet > Edit ge2

7.1.2 Configure Zones

Do the following to create a VPN zone.
118
ZyWALL USG 300 User's Guide