Driver Security - Leica iNEX User Manual

6.7

Driver Security

The Advanced Data Recording option also contains driver security features
which by default will be set to OFF. If required this feature can be setup
to allow operators to log into the iNEX. Each driver can be preconfigured
for one of three security levels to prevent unauthorised access to critical
settings or to prevent an operator deleting information.
Requiring the driver to log into the iNEX has the added advantage of
recording the driver name with the treatment information, which can then
be viewed in the History.
6.7.1 Adding a Driver
Depending on the level of security required, drivers can be assigned a
User Level (see 6.7.3 About Security Levels) and a Password.
1. From the Main Menu press SETUP.
2. Press MORE.
3. Press
MEMORY
4. Press DRIVER.
5. Press NEW.
6. Press DRIVER. Enter the
NEW
drivers name and press TICK.
7. Set the User Level, a Password if
required and press ACCEPT.
8. Set Driver Login at Startup to ON if
the driver is required to login each
time the system is turned ON.
iNEX User Manual
SETUP.
Page 63 Rev 2