Responsibilities - Leica iNEX User Manual

13.4 Responsibilities

Manufacturer of the product
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as
Leica Geosystems, is responsible for supplying the product, including the
user manual and original accessories, in a completely safe condition.
Manufacturers of non Leica Geosystems accessories
The manufacturers of non Leica Geosystems accessories for the product
are responsible for developing, implementing and communicating safety
concepts for their products, and are also responsible for the effectiveness
of those safety concepts in combination with the Leica Geosystems
product.
Person in charge of the product
The person in charge of the product has the following duties:
• To understand the safety instructions on the product and the
instructions in the user manual.
• To be familiar with local regulations relating to safety and accident
prevention.
• To inform Leica Geosystems immediately if the product and the
application becomes unsafe.
• To ensure that the national laws, regulations and conditions for the
operation of radio transmitters are respected.
Warning
• The person responsible for the product must ensure that it is
used in accordance with the instructions. This person is also
accountable for the training and the deployment of personnel
who use the product and for the safety of the equipment in
use.
iNEX User Manual
Page 100 Rev 2