Leica iNEX User Manual page 48

4.4.4 Adjusting the Guideline for GPS Drift
Depending on the specific hardware configuration for the iNEX from time
to time it may be necessary to adjust a guideline to compensate for drift
in the GPS position. This is particularly evident when using lower quality
GPS receivers, returning to a field and using guidelines several hours after
they were created.
The guideline can be adjusted by a specific amount or the amount to shift
the line can be automatically calculated.
1. From the Main menu press GUIDE.
2. If Guidance is not active, press the required Guidance button to
start the relevant Guidance and position the vehicle on top of a
previous pass in the field.
3. Press OPTIONS.
4. Press NUDGE.
5. Press
AUTO
The distance between the
guideline and the current vehicle
position will be calculated and
displayed as the offset.
6. Press ACCEPT.
Note: Parallel and A+ Heading are the only guidelines which can be adjusted using the Nudge
feature.
Note: The amount to nudge the guideline can be manually entered on the Nudge Guideline
screen by dragging the slider bar or pressing the plus and minus buttons.
Note: Pressing BACK on the Nudge Guideline screen will cancel adjusting the guideline.
iNEX User Manual
NUDGE.
Page 41 Rev 2