iNEX User Manual
Gooseneck Hitch
Physical Measurement
1. Hitch point to rear axle
centreline.
if hitch point is in front of rear axle
as shown then enter value as a
negative.
2. Rear axle centreline to GPS
antenna.
3. Vehicle centreline to GPS
antenna.
If GPS antenna is left of the
centreline then enter value as a
negative.
Icon Measurement
1. Back of vehicle to rear axle
centreline.
2. Vehicle body width.
3. Rear axle centreline to
front of vehicle.
Page 113
Value
Value
Rev 2