Table of Contents
Advertisement
17. The screen shows the list of products
which are to be added to the tank and
the respective quantities required to
attain the application rates, hence this
list can be used to determine the
quantity of each product with which to
fill the tank.
18. When complete press
to the Map Screen and begin work.
The tank volume recorded on the iNEX will run down at a similar rate to
the real tank volume on the vehicle. When the tank is completely empty it
will also need to be refilled. If refilling the tank with the same product mix
or similar there is a Fast Fill process for this.
1. From the Main Menu press RECORDS.
2. Press TANK.
3. Press FASTFILL.
4. Make any required changes and press
ACCEPT.
iNEX User Manual
to return
ACCEPT
Page 58
Rev 2
Advertisement
Table of Contents
