Leica iNEX User Manual page 27

3.5.2 Define Rig Details
The Rig comprises one or more equipment items. The Rig also defines the
boom or swath width, the tank capacity, the flow controller and steering
controller used in the makeup of the Rig. The first step is to create a Rig
and give it a name.
1. From the Main menu press SETUP.
2. Press
VEHICLE
3. Press
RIG SETUP.
4. Press NEW.
5. Press the Rig Name button to enter a
name for the rig e.g. "Main Spray Rig".
3.5.2.1 Combining Vehicles to Create A Rig
By combining the equipment items to form a Rig the iNEX can accurately
model the movements of the vehicle and the treatment being applied.
1. Press
SELECT
2. Define the number of equipment
items in the Rig by pressing the
Number of Equipment in Rig button.
Press to set the number of
equipment items then press TICK.
3. Select which piece of equipment to
define by touching on the Equip. no.
button until the desired equipment item number is shown.
4. Press the Equipment Name button to select the previously defined
Equipment item.
5. Press when all Equipment items in the Rig have been selected.
TICK
Note: The iNEX will only allow a TRACTOR to be added as the first equipment item in a Rig while
subsequent equipment items must be IMPLEMENTS.
iNEX User Manual
SETUP.
EQUIPMENT.
Page 20 Rev 2