Leica iNEX User Manual page 26

3.5.1 Define Vehicle Offsets
Each piece of equipment in the rig will need to be defined separately so
that treatments can be accurately recorded. The first equipment item in
the Rig will be a tractor, articulated tractor, self propelled sprayer, truck,
combine harvester, etc. With the exception of the articulated tractor the
method for measuring the listed vehicles are the same and are covered by
the TRACTOR setting in the Equipment Wizard.
1. From the Main menu press SETUP.
2. Press
VEHICLE
3. Press
EQUIPMENT
4. Press NEW.
5. Select the Equipment Type by repeatedly
pressing the Equipment Type button. If
unsure of which equipment type would
best suit your vehicle check the
examples in Appendix 15.1 Equipment
Measurement Examples.
6. Press
EQUIPMENT
e.g. "Big Tractor", press
7. Accurately enter the required Physical Measurement and press
8. Enter the approximate measurements as shown by the wizard and
press TICK. These measurements are only used to generate the
vehicle icon on the screen and hence can be approximate values.
9. Repeat these steps for each equipment item that makes up the Rig.
Note: See Appendix 15.1 Equipment Measurement Examples for examples of how to measure
other vehicles such as Self Propelled Sprayer with front mounted Boom, etc.
iNEX User Manual
SETUP.
SETUP.
NAME, enter a Name for the equipment item
followed by
TICK
Page 19
.
.
Rev 2