Leica iNEX User Manual page 29

Steer Control
When the iNEX has the AutoSTEER option enabled the Steer Controller will
either be pre-selected or the operator will be able to pick from a number
of different steering controllers.
1. On the Edit Rig screen (see 3.5.2 Define
Rig Details) press
2. Press the Steer Controller name button.
3. Select the desired Steering Controller
from the list and press ACCEPT.
4. Press TICK.
3.5.3 Master & Section Switch Detection
To determine when to record treatment the iNEX has a Master Switch and
Section Switches. These switches can be triggered by touching the screen
or sensing the state from external hardware.
3.5.3.1 Master Switch
By default the system will be configured for the master switch to be
triggered by touching on the Master Switch Status on the screen.
Depending on the options purchased and the attached hardware there are
a number of different options for detecting the master switch state from
existing equipment; these include Touch, Sense, Sense Dipole and Flow
Controller.
1. From the Main menu press SETUP.
2. Press
VEHICLE
3. Press
SWITCH
4. Touch on the Master Switch button
until the required setting is displayed.
iNEX User Manual
STEER CONTROL.
SETUP.
SETUP.
Page 22 Rev 2