Power Cable - Leica iNEX User Manual

1.2.3 Power Cable

a. Power connector
b. Red wire (12-volt positive)
c. Black wire (negative ground)
Power Cable Description
Power Connector
Supplies 12-volt power to the
iNEX via the Power Input
connector on the Vehicle cable.
Red Wire (12-volt positive)
Connects to a clean 12-volt power
source, such as directly to a
battery.
1.2.4 AS310 (Optional Component)
The AS310 is an optional component which is required for some 3rd party
rate controllers when automatic section shut-off is being used.
a. Voltage port
b. Data port
AS310 Description
Data Port
Connects to Port C on the iNEX
Vehicle Cable.
iNEX User Manual
a
Black Wire (negative ground)
Connects to the vehicle's earth.
Voltage Port
Connects to various automatic
section shut-off interface cables.
Page 4
b
a b
Rev 2
c