Leica iNEX User Manual page 124

iNEX User Manual
Self Propelled Combine Harvester
1. Cutter bar to front axle
centreline.
Value should be entered as a
negative.
2. Front axle centreline to
gps antenna.
If GPS antenna is behind front axle
centreline then enter value as a
negative.
3. Cutter bar centreline to
GPS antenna.
If GPS antenna is left of the cutter
bar centreline then enter value as
a negative.
1. Back of vehicle to front
axle centreline.
2. Vehicle body width.
3. Front axle centreline to
front of vehicle.
Page 117
Physical Measurement
Icon Measurement
Value
Value
Rev 2