Using Fieldnet - Leica iNEX User Manual

11.2 Using FieldNET

11.2.1 Connecting to Another Vehicle in the Group
1. Press FIELD.
2. Press FIELDNET.
3. Select the vehicle from the list to
connect to by pressing on it and
then press CONNECT.
The Link status light will turn green.
By default a Guide Link Type will be created between your vehicle and the
selected vehicle. The Guide Link Type will treat the incoming information
as if it was done with your vehicle, so that AutoSPRAY and Guidance will
work with the treatment done by the other vehicle. For more information
on Link Types see 11.2.2 Understanding the Link Type.
11.2.2 Understanding the Link Type
There are three Link Types available: Guide, Display and Hidden. By default
when a new link is set up with a vehicle the Link Type selected will be
Guide. Each of the Link Types are described below.
Guide The treatment received from the selected vehicle will be
treated as if it is the same as the current treatment and
therefore all of the normal features of the iNEX such as
Guidance and AutoSPRAY are available.
Display The treatment received from the selected vehicle will be in a
separate layer under the current treatment. AutoSPRAY and
Guidance will not recognise any treatment received from the
other vehicle.
Hidden Hidden can be selected when a link has been created with
another vehicle but it is no longer desirable to see or work
with the treatment.
iNEX User Manual
Page 88 Rev 2