Table of Contents
Advertisement
10.2.3 Translation
The translation feature allows the iNEX to reconfigure the section voltage
output to different pins on the AutoSPRAY voltage interface connector.
This may be necessary if some or all of the sections turn off in the wrong
order when AutoSPRAY automatically turns sections ON or OFF over a
treated area. In most cases this feature will not be required unless the
vehicle has custom wiring which is different to most normal installations.
1. From the Main Menu press SETUP.
2. Press and hold the
button for four seconds, until the
AutoSPRAY Section Translation screen
is displayed.
3. Select the boom section which is
incorrect by pressing the
button until the required
SECTION
number is displayed.
4. Set the section which is changing
when the on screen boom section is
changing by pressing the
AUTOSPRAY SECTION
entering the value and pressing TICK.
5. Press
or
BACK
complete.
iNEX User Manual
AUTOSPRAY
BOOM
button,
to
EXIT SETUP
Page 83
Rev 2
Advertisement
Table of Contents
