Upgrading Software; Downgrading Software - Leica iNEX User Manual

12.2 Upgrading Software

Software upgrades can be performed in two ways, from a USB memory
stick using Launcher mode or when the option is available via a remote
download from Virtual Wrench
1. To upgrade software via a USB
memory stick start the iNEX into
Launcher mode (see 12.1 Starting Up
in Launcher Mode).
2. Press SOFTWARE.
3. Press UPGRADE.

12.3 Downgrading Software

When the iNEX is updated a backup of the current software will be
created to allow the system to be restored to the previous version if
required.
When the previous version is restored any settings or treatments recorded
since the upgrade will be lost.
1. Start the iNEX into Launcher mode
(see 12.1 Starting Up in Launcher
Mode).
2. Press SOFTWARE.
3. Press
RESTORE
iNEX User Manual
TM
(see 9.3 Upgrading Software Remotely).
PREVIOUS.
Page 92 Rev 2