Table of Contents
Advertisement
10 AutoSPRAY
AutoSPRAY is an optional feature which is enabled when AutoSPRAY is
purchased. Along with the feature unlock code (see 7.1 Enabling New
Options) additional hardware may also be required.
AutoSPRAY greatly reduces the need for manually switching implement
sections ON or OFF when going over a previously treated area by
automatically controlling the state of the sections.
10.1 Setting Up AutoSPRAY
Once AutoSPRAY has been unlocked on the iNEX the feature can be
switched ON and OFF as necessary.
1. From the Main Menu press SETUP.
2. Press AUTOSPRAY.
3. Press AutoSPRAY
AutoSPRAY ON and enter any
required calibration values.
iNEX User Manual
to turn
ON/OFF
Page 79
Rev 2
Advertisement
Table of Contents
