Leica iNEX User Manual page 117

iNEX User Manual
Standard Tractor
Physical Measurement
1. Hitch or flow point to rear
axle centreline.
2. Rear axle centreline to GPS
antenna.
If GPS antenna is behind the axle
then enter value as a negative.
3. Vehicle centreline to GPS
antenna.
If GPS antenna is left of the
centreline then enter value as a
negative.
Icon Measurement
1. Back of cabin to axle
centreline.
2. Vehicle body width.
3. Axle centreline to front of
vehicle.
Page 110
Value
Value
Rev 2