Table of Contents
Advertisement
10.3.3 AutoSPRAY Override
AutoSPRAY Override can be used to force
some sections to ON or OFF while the rest
remain controlled automatically.
1. From the Main Menu press and hold
AutoSPRAY Status button until the
AutoSPRAY Override Menu is displayed.
2. Press
OVERRIDE
of override is displayed.
When ticks are displayed overridden
sections will be forced ON.
When crosses are displayed overridden
sections will be forced OFF.
3. Press the
RIGHT
to be overridden from left to right.
4. Press the
LEFT
to be overridden from right to left.
5. Press
RESET
AutoSPRAY control.
iNEX User Manual
until the required type
arrow to select sections
arrow to select sections
to return all sections to
Page 85
Rev 2
Advertisement
Table of Contents
