Leica iNEX User Manual page 88

Metric Calculations
Latency (s) = Distance Travelled (m) ÷ Speed (km/h) x 3.6
For example, assuming the operator was travelling at 20km/hr and the
distance from the rope to where the sprayer reacted is 5m:
5m ÷ 20km/h x 3.6 = 0.9 seconds Latency
Imperial Calculations
Latency (s) = Distance Travelled (ft) ÷ Speed (mph) x 0.68
For example, assuming the operator was travelling at 12mph and the
distance from the rope to where the sprayer reacted is 16ft:
16ft ÷ 12mph x 0.68 = 0.9 seconds Latency
10.2.1.1 Troubleshooting Latency
The section takes too long to
turn OFF and is causing
overlap
The section turns OFF too
early and is causing a missed
area
The section takes too long to
turn ON and is causing a
missed area
The section turns ON too early
and is causing overlap
iNEX User Manual
Problem
Page 81
Solution
Increase OFF Latency
value
Decrease OFF Latency
value
Increase ON Latency
value
Decrease ON Latency
value
Rev 2