Leica iNEX User Manual page 28

3.5.2.2 Configure Advanced Settings
Depending on the options which have been purchased with the iNEX the
Tank Size, Flow Controller or Steer Controller settings may be available
and need to be configured. If the relevant setting button in the Rig is
disabled then the option has not been enabled or is locked to a particular
setting.
Tank
The Tank Size is available when Advanced Data Records has been enabled.
It is used in the Tank Manager to determine the maximum size of the tank
on the rig and hence how much product needs to be loaded or mixed
when completely filling the tank.
1. On the Edit Rig screen (see 3.5.2 Define
Rig Details) press
2. Press on the Tank Size value button and
enter the new value.
3. Press TICK.
Flow Control
The Flow Controller should be configured when a direct cable connection
via Serial or CANbus has been installed. The features available for any
given flow controller varies and will be dependant on the capabilities of
the particular flow controller.
1. On the Edit Rig screen (see 3.5.2 Define
Rig Details) press
2. Press the Flow Controller name button.
3. Select the desired flow controller from
the list and press ACCEPT.
4. Press TICK.
iNEX User Manual
TANK SETTINGS.
FLOW CONTROL..
Page 21 Rev 2