Leica iNEX User Manual page 40

4.3.2 Using A+ Heading Guidance
By default A+ Heading Guidance will be selected as one of the Active
Guidance Types and is available on the Guide menu. See section 4.2
Selecting Active Guidance Types.
1. From the Main menu press GUIDE.
2. Drive to the start point of the line and
press HEAD. Enter the desired
A+
Heading for the guideline and press
TICK.
3. Two large black dots are shown on the
Map Screen which represent the A Point
and the direction in which the guideline
will be created.
4. Press
A+ HEAD
activate the guideline.
The Map Screen shows a red line which
passes though the two points.
The Virtual Road Window shows the path
to be followed by the operator.
5. To continue on another A+ Heading pass turn the vehicle around
and the system will automatically jump to the nearest guideline.
Note: The Heading value is measured as Decimal Degrees from True North and can be entered to
an accuracy of three decimal points.
Note: A new A+ Heading guideline can be created by pressing the A+ HEAD button when A+
Heading Guidance is active. The operator will be warned before the existing line is replaced.
iNEX User Manual
a second time to
Page 33 Rev 2