Intended Use - Leica iNEX User Manual

13.2 Intended Use

Permitted use
• The iNEX is intended for agricultural and forestry use only.
• The iNEX is only intended to be fitted to agricultural vehicles. It is not
permitted to install this product in any other vehicles.
• Data communication with external appliances.
• Automatic section control with external devices.
• Guidance of approved agricultural equipment.
Adverse use
• Use of the product without instruction.
• Use outside of the intended limits.
• Disabling safety systems.
• Removal of hazard notices.
• Opening the product using tools, for example screwdriver, unless this
is specifically permitted for certain functions.
• Modification or conversion of the product.
• Use after misappropriation.
• Use of products with obviously recognizable damages or defects.
• Use with accessories from other manufacturers without the prior
explicit approval of Leica Geosystems.
• Inadequate safeguards at the working site, for example when using
on the intended site.
Warning
• Adverse use can lead to injury, malfunction and damage.
• It is the task of the person responsible for the equipment to
inform the user about hazards and how to counteract them.
The product is not to be operated until the user has been
instructed on how to work with it.
iNEX User Manual
Page 98 Rev 2