Specifying Control Panel Settings (Accessibility Mode); Displaying The Accessibility Setting Screen; To Set The "Key Repeat Start/Interval Time" Function - Konica Minolta bizhub 750 User Manual

Additional Copy Operations
4.7 Specifying Control Panel Settings (Accessibility
Mode)
This section contains details on the procedures for specifying control panel
settings and adjusting the touch panel.

Displaying the Accessibility Setting Screen

% Press the [Accessibility]
key.
– To exit the Accessi-
bility Setting screen
and return to the Ba-
sic screen, touch
[Close].
The Accessibility Setting
screen appears.

To set the "Key Repeat Start/Interval Time" function

The length of time until the setting begins to change after holding down [+]
or [-] in the Zoom screen or [Light] or [Dark] in the Density screen and the
length of time for the value to change in Enlarge Display mode can be spec-
ified.
The factory default setting for "Time To Start" is 0.8 second and the setting
for "Interval" is 0.3 second.
0 The settings specified for the "Key Repeat Start/Interval Time" function
are only applied in the Enlarge Display mode.
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 4-23)
bizhub 750/600
Accessibility
4
4-23