Display Interface M-Eth0 - HP 6125XLG Command Reference Manual

display interface m-eth0

Use display interface m-eth0 to display information about the management Ethernet interface.
Syntax
display interface m-eth0
Views
Any view
Examples
# Display information about the management Ethernet interface.
<boot> display interface m-eth0
m-eth0
Table 33 Command output
Field
m-eth0 Link encap
HWaddr
inet addr
Bcast
inet6 addr
Scope
UP BROADCAST RUNNING MULTICAST
Metric
RX packets
Link encap:Ethernet
inet addr:192.168.0.62
inet6 addr: FE80::201:2FF:FE03:409/10 Scope:Link
UP BROADCAST RUNNING MULTICAST
RX packets:13468 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1413885 (1.3 MiB)
Interrupt:29
HWaddr 00:01:02:03:04:09
Bcast:192.168.0.255
MTU:1500
TX bytes:1056 (1.0 KiB)
Description
Link encapsulation type of the management Ethernet interface.
MAC address of the interface.
IPv4 address of the interface.
Broadcast address of the interface.
IPv6 address of the interface.
Usage scope of the IPv6 address.
The interface is up, in the state Running, and supports
broadcast and multicast.
Priority of the interface.
Statistics for received packets, including:
•
Total number of received packets.
•
Number of erroneous packets.
•
Number of discarded packets.
•
Number of packets affected by queue overflow.
•
Number of packets affected by frame queue errors.
190
Mask:255.255.255.0
Metric:1