HP 6125XLG Command Reference Manual page 65

If a predefined user role rule and a user-defined user role rule conflict, the user-defined user role rule
•
takes effect.
Any rule modification, addition, or removal for a user role takes effect only on the users that log in with
the user role after the change.
Access to the file system commands is restricted by both the file system command rules and the file system
feature rule.
A command with output redirection to the file system is permitted only when the command type write is
assigned to the file system feature.
When you specify a command string, follow the guidelines in
Table 6 Command string configuration rules
Rule
Semicolon (;) is the delimiter.
Asterisk (*) is the wildcard.
Keyword abbreviation is allowed.
Guidelines
Use a semicolon to separate the command of each view that you must
enter before you access a command or a set of commands, except for the
commands (for example, display and dir) available in user view or any
view.
Each semicolon-separated segment must have at least one printable
character.
To specify the commands in a view but not the commands in its subviews,
use a semicolon as the last printable character in the last segment. To
specify the commands in a view and its subviews, the last printable
character in the last segment must not be a semicolon.
For example, you must enter system view before you enter interface view.
To specify all the commands that start with ip in any interface view, you
must use the "system ; interface * ; ip * ;" command string.
For another example, the "system ; radius scheme * ;" command string
represents all the commands that start with radius scheme in system view.
The "system ; radius scheme *" command string represents all the
commands that start with radius scheme in system view and all the
commands in RADIUS scheme view.
An asterisk represents zero or multiple characters.
In a non-last segment, you can use an asterisk only at the end of the
segment.
In the last segment, you can use an asterisk in any position of the segment.
If the asterisk appears at the beginning, you cannot specify any printable
characters behind it.
For example, the "system ; *" command string represents all the
commands available in system view and all its subviews, and the
"debugging * event" command string represents all event debugging
commands available in user view.
You can specify a keyword by entering its first few characters. Any
command that starts with this character string matches the rule.
For example, "rule 1 deny command dis mpls lsp protocol static" denies
access to the commands display mpls lsp protocol static and display mpls
lsp protocol static-cr.
58
Table 6.