Set Authentication Password - HP 6125XLG Command Reference Manual

Parameters
all: Specifies all user interfaces.
number1: Specifies the absolute number of a user interface, in the range of 0 to 35.
aux: Specifies the AUX user interface.
console: Specifies the console user interface.
vty: Specifies the VTY user interface.
number2: Specifies the relative number of a user interface, in the range of 0 to 9 for a console/AUX
interface or 0 to 15 for a VTY user interface.
Usage guidelines
To end a message, press Enter. To cancel a message and return to user view, press Ctrl+C.
Examples
# Before you restart the device, send a notification to VTY 1 to inform the user.
<Sysname> send vty 1
Input message, end with Enter; abort with CTRL+C:
Note please, I will reboot the system in 3 minutes.
Send message? [Y/N]:y
The message should appear on the screen of the user's configuration terminal, as shown in the following
example:
[Sysname]
***
***
***Message from vty0 to vty1
***
Your attention, please. I will reboot the system in 3 minutes.

set authentication password

Use set authentication password to set a password for password authentication.
Use undo set authentication password to remove the password.
Syntax
set authentication password { hash | simple } password
undo set authentication password
Default
No password is set for password authentication.
Views
User interface view
Predefined user roles
network-admin
29