HP 6125XLG Command Reference Manual page 26

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1: Specifies the absolute number of a user interface, in the range of 0 to 35.
aux: Specifies the AUX user interface.
console: Specifies the console user interface.
vty: Specifies the VTY user interface.
number2: Specifies the relative number of a user interface, in the range of 0 to 9 for a console/AUX
interface or 0 to 15 for a VTY user interface.
summary: Displays summary information about user interfaces. If you do not specify this keyword, the
detailed information is displayed.
Examples
# Display information about user interface 0.
<Sysname> display user-interface 0
Idx Type
0 CON 0
+ : User interface is active.
F : User interface is active and in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Auth : Login authentication mode.
Int : Physical port of the user interface.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 1 Command output
Field Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen
Modem
(-) is displayed.
# Display summary information about all user interfaces.
<Sysname> display user-interface summary
User interface type : [CON]
User interface type : [AUX]
User interface type : [VTY]
Tx/Rx Modem Auth
9600 -
0:XXXX XXXX XX
10:XXXX XXXX XX
20:UUUX XXXX XXXX XXXX
Int
N -
19