Authentication-Mode - HP 6125XLG Command Reference Manual

******************************************************************************
* Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
User interface con0 is available.
Press ENTER to get started.
3. Press Enter.
Pressing Enter does not start a session.
4. Enter s.
A terminal session is started.
<Sysname>

authentication-mode

Use authentication-mode to set the authentication mode for a user interface.
Use undo authentication-mode to restore the default.
Syntax
In non-FIPS mode:
authentication-mode { none | password | scheme }
undo authentication-mode
In FIPS mode:
authentication-mode scheme
undo authentication-mode
Default
In non-FIPS mode:
Console user interface—Authentication is disabled.
•
AUX user interface—Authentication is disabled if the device started up with the default
•
configuration file, and password authentication is enabled if the device started up with empty
configuration.
• VTY user interface—Password authentication is enabled.
In FIPS mode, scheme authentication is enabled.
Views
User interface view
Predefined user roles
network-admin
13
*
*
*