Display Memory - HP 6125XLG Command Reference Manual

Usage guidelines
For diagnostics or troubleshooting, you can use separate display commands to collect running status
data module by module or use the display diagnostic-information command to bulk collect running data
for multiple modules.
This display command does not support the | by-linenum option, the > filename option, or the >>
filename option. However, this command asks you whether you want to save the output to a file or
display the output on the screen. The file used to save the output is automatically compressed to save
storage space.
Examples
# Display the operating statistics for multiple feature modules in the system.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
<Sysname>
To view the operating statistics, use the gunzip command to decompress the file diag.gz and then use the
more command to view the file content.

display memory

Use display memory to display memory usage.
Syntax
display memory [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its ID. Without this option, the command displays
memory usage for all member devices.
Examples
# Display memory usage.
<Sysname> display memory
The statistics about memory is measured in KB:
Slot 1:
Mem:
-/+ Buffers/Cache:
Swap:
Please input the file name(*.gz)[flash:/diag.gz]:
Diagnostic information is outputting to flash:/diag.gz.
Total Used
1016892 315044
237148
0 0
Please wait...
Save successfully.
Free Shared
701848 0
779744
0
156
Buffers Cached
0 77896
FreeRatio
69.0%