Hotkey; Quit - HP 6125XLG Command Reference Manual

hotkey

Use hotkey to assign a command to a configurable hotkey.
Use undo hotkey to restore the default.
Syntax
hotkey { ctrl_g | ctrl_l | ctrl_o | ctrl_t | ctrl_u } command
undo hotkey { ctrl_g | ctrl_l | ctrl_o | ctrl_t | ctrl_u }
Default
ctrl_g: display current-configuration (display the running configuration).
•
• ctrl_l: display ip routing-table (display the IPv4 routing table information).
ctrl_o: undo debugging all (disable all debugging functions).
•
ctrl_t: No command is assigned to this hotkey.
•
ctrl_u: No command is assigned to this hotkey.
•
Views
System view
Predefined user roles
network-admin
Parameters
ctrl_g: Assigns a command to Ctrl+G.
ctrl_l: Assigns a command to Ctrl+L.
ctrl_o: Assigns a command to Ctrl+O.
ctrl_t: Assigns a command to Ctrl+T.
ctrl_u: Assigns a command to Ctrl+U.
command: Specifies the command to be assigned to the hotkey.
Usage guidelines
To facilitate CLI operation, the system defines some hotkeys and provides five configurable command
hotkeys. Pressing a hotkey executes the command assigned to the hotkey.
To display system-defined and configurable hotkeys, use the display hotkey command.
Examples
# Assign the display tcp status command to the hotkey Ctrl+T.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status
Related commands
display hotkey

quit

Use quit to return to the upper-level view.
9