Get - HP 6125XLG Command Reference Manual

Password:
230 User logged in
Remote system type is HP

get

Use get to download a file from the FTP server and save the file.
Syntax
get remotefile [ localfile ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
remotefile: Specifies the name of the file to be downloaded.
localfile: Specifies a name for the downloaded file.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
To save the downloaded file to the working directory accessed by the ftp command, the localfile
argument must specify a file name such as a.cfg. If you do not provide the localfile argument, the
downloaded file uses its original name.
To save the downloaded file to some other directory, the localfile argument must specify the target
directory plus the file name such as flash:/subdirectory/a.cfg. Otherwise, the command fails to take
effect.
Examples
# Download file a.txt and save it as b.txt in the working directory accessed by the ftp command.
ftp> get a.txt b.txt
local: b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# Download file a.txt to the folder test under the working directory accessed by the ftp command.
ftp> get a.txt flash:/test/b.txt
local: flash:/test/b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# Download file a.txt to the Flash root directory of member device 1 and save it as c.txt.
ftp> get a.txt slot1#flash:/c.txt
local: slot1#flash:/c.txt remote: a.txt
150 Connecting to port 47460
226 File successfully transferred
1569 bytes received in 0.0564 seconds (27.2 kbyte/s)
82