Display Command-Alias - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use display >>
to save the output from a display command for management purposes.
If the specified file does not exist, the system creates the file and then saves the output to the file. If the file
already exists, the system appends the output to the end of the file.
Examples
# Append the VLAN 999 settings to the end of the vlan.txt file.
<Sysname> display vlan 999 >> vlan.txt
# Check the content of the vlan.txt file.
<Sysname> more vlan.txt
VLAN ID: 1
VLAN type: Static
Route interface: Not configured
Description: VLAN 0001
Name: VLAN 0001
Tagged ports:
Untagged ports:
Ten-GigabitEthernet1/1/5
VLAN ID: 999
VLAN type: Static
Route interface: Configured
IP address: 192.168.2.1
Subnet mask: 255.255.255.0
Description: For LAN Access
Name: VLAN 0999
Tagged ports:
Untagged ports:
Ten-GigabitEthernet1/1/6

display command-alias

Use display command-alias to display the status of the command keyword alias function and the
configured command keyword alias.
Syntax
display command-alias
None
None
5