Views
System view
Predefined user roles
network-admin
Parameters
schedule-name: Specifies the schedule name, a case-sensitive string of 1 to 47 characters.
Usage guidelines
You can schedule a job to have the device automatically run a command or a set of commands without
administrative interference.
To configure a schedule:
1.
Use the scheduler job command to create a job.
2.
In job view, use the command command to assign commands to the job.
3.
Use the scheduler schedule command to create a schedule.
4.
In schedule view, use the job command to assign the job to the schedule. You can assign multiple
jobs to a schedule. The jobs must already exist.
5.
In schedule view, use the time at, time once, or time repeating command to specify an execution
time for the schedule. You can specify only one execution time per schedule.
Examples
# Create a schedule named saveconfig.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
Related commands
job
•
time at
•
time once
•
time interval
•
shutdown-interval
Use shutdown-interval to set the detection timer.
Use undo shutdown-interval to restore the default.
Syntax
shutdown-interval time
undo shutdown-interval
Default
The detection interval is 30 seconds.
Views
System view
179