Ping Ipv6 - HP 6125XLG Command Reference Manual

Table 36 Command output
Field
PING 192.168.209.100(192.168.209.100)
56 data bytes
64 bytes from 192.168.209.100:seq=0 ttl=64
time=0.160 ms
--- 192.168.209.100 ping statistics ---
5 packets transmitted
5 packets received
0.0% packet loss
round-trip min/avg/max = 0.061/0.082/0.160
ms

ping ipv6

Use ping ipv6 to check the connectivity to an IPv6 address.
Syntax
ping ipv6 [ -c count | -s size ] * ipv6-address
Views
Any view
Parameters
-c count: Specifies the number of ICMPv6 echo requests to send, in the range of 1 to 2147483647. The
default is 5.
-s size: Specifies the length (in bytes) of each ICMPv6 echo request, in the range of 20 to 8100. The
default is 56.
Ipv6-address: Specifies the IPv6 address of the destination.
Usage guidelines
When you execute the ping ipv6 command, the device sends ICMPv6 echo requests to the destination.
You can press Ctrl+C to abort the ping operation.
description
Checking the connectivity to the device at
192.168.209.100.
Number of data bytes in each ICMP echo request.
Received an ICMP reply from the device at
192.168.209.100. If no reply is received during the
timeout period, this information is not displayed.
Fields of the reply:
•
bytes—Number of data bytes in the ICMP reply.
•
seq—Sequence number of the reply. You can
examine the sequence numbers of replies to
determine whether packets are missing, disordered,
or duplicated.
•
ttl—TTL value in the ICMP reply.
•
time—Response time.
Statistics for packets sent and received during the ping
operation.
Number of ICMP echo requests sent.
Number of ICMP echo replies received.
Percentage of echo requests that failed to be echoed
back.
Minimum/average/maximum response time, in
milliseconds.
201