Ipv6 Gateway; Mkdir - HP 6125XLG Command Reference Manual

Examples
# Assign IPv6 address 2001::1/64 to the management Ethernet interface.
<boot> system-view
[boot] interface m-eth0
[boot-m-eth0] ipv6 address 2001::1 64

ipv6 gateway

Use ipv6 gateway to specify an IPv6 gateway for the management Ethernet interface.
Use undo ipv6 gateway to restore the default.
Syntax
ipv6 gateway link-local
undo ipv6 gateway
Default
The management Ethernet interface has no IPv6 gateway configured.
Views
Management Ethernet interface view
Parameters
link-local: Specifies the Link-local address of an IPv6 gateway.
Usage guidelines
When the device needs to communicate with a device on a remote IPv6 network, you must specify an
IPv6 gateway for the management Ethernet interface.
The IPv6 gateway address must be on the same segment as the IPv6 address of the management Ethernet
interface.
Changing or removing the IPv6 address of the management Ethernet interface removes the port's IPv6
gateway configuration.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Configure the management Ethernet interface to use IPv6 gateway 2002::1.
<boot> system-view
[boot] interface m-eth0
[boot-m-eth0] ipv6 gateway 2002::1

mkdir

Use mkdir to create a directory on a storage medium.
Syntax
mkdir directory
Views
User view
198