Interface Policy Deny - HP 6125XLG Command Reference Manual

Related commands
display role feature
•
display role feature-group
•
• role feature-group

interface policy deny

Use interface policy deny to enter user role interface policy view.
Use undo interface policy deny to restore the default user role interface policy.
Syntax
interface policy deny
undo interface policy deny
Default
A user role has access to any interface.
Views
User role view
Predefined user roles
network-admin
Usage guidelines
The interface policy deny command denies the access of a user role to any interface.
To restrict the interface access of a user role to only a set of interfaces:
1. Use interface policy deny to deny access to any interface.
2. Use permit interface to specify accessible interfaces.
To perform any of the following operations, you must make sure the interface is permitted by the interface
policy of any user role that you are logged in with:
• Create, remove, or configure an interface.
Enter its interface view.
•
Specify the interface in a feature command.
•
The create and remove operations are available only to logical interfaces.
Any change to a user role interface policy takes effect only on users who log in with the user role after the
change.
Examples
# Deny the user role role1 to access any interface.
<Sysname> system-view
[Sysname] role name role1
[Sysname-role-role1] interface policy deny
[Sysname-role-role1-ifpolicy] quit
# Deny the user role role1 to access any interface but Ten-GigabitEthernet 1/1/5 to Ten-GigabitEthernet
1/1/9.
<Sysname> system-view
49