FTP commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
FTP is not supported in FIPS mode.
FTP server commands
display ftp-server
Use display ftp-server to display FTP server configuration and status information.
Syntax
display ftp-server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display FTP server configuration and status information.
<Sysname> display ftp-server
FTP server is running.
Max user number:
User count:
Idle-timeout timer (in minutes):
Table 7 Command output
Field
Max user number
User count
Idle-timeout timer (in minutes)
Related commands
•
ftp server enable
ftp timeout
•
5
1
30
Description
Maximum number of concurrent logged-in users.
Number of the current logged-in users.
If no packet is exchanged between the FTP server and client during this
period, the FTP connection is broken.
65