Pwd; Quit - HP 6125XLG Command Reference Manual

Examples
# Check the connectivity to the destination 1 1 1:1 1 1::1 1 1:1 1 1.
<boot> ping ipv6 111:111::111:111
PING 111:111::111:111(111:111::111:111):56 data bytes
64 bytes from 111:111::111:111:seq=0 ttl=64 time=0.160 ms
64 bytes from 111:111::111:111:seq=1 ttl=64 time=0.062 ms
64 bytes from 111:111::111:111:seq=2 ttl=64 time=0.061 ms
64 bytes from 111:111::111:111:seq=3 ttl=64 time=0.065 ms
64 bytes from 1111:111::111:111:seq=4 ttl=64 time=0.063 ms
--- 111:111::111:111 ping statistics ---
5 packets transmitted,5 packets received,0% packet loss
round-trip min/avg/max = 0.061/0.082/0.160 ms
The output shows that the destination is reachable. All ICMP echo requests were echoed back and the
minimum, average, and maximum response time values are 0.061 ms, 0.082 ms, and 0.160 ms,
respectively.

pwd

Use pwd to display the current path.
Syntax
pwd
Views
User view
Examples
# Display the current path.
<boot> pwd
flash:
Related commands
system-view
•
interface m-eth0
•

quit

Use quit to return to the upper level view.
Syntax
quit
Default
After entering emergency shell mode, the device is in user view.
Views
System view, management Ethernet interface view
202