HP 6125XLG Command Reference Manual page 145

CAUTION:
In an IRF fabric, use the undo startup saved-configuration command with caution. This command can
cause an IRF split after the IRF fabric or an IRF member reboots.
If neither backup nor main is specified, the startup saved-configuration command specifies the main
next-startup configuration file.
Even though the main and backup next-startup configuration files can be the same one, specify them as
separate files for high availability.
Do not save the configuration file on a USB disk. During the device boot process, the device cannot read
configuration file from the USB disk.
The undo startup saved-configuration command changes the file attribute of the main and backup
next-startup configuration files to NULL, but it does not delete the two configuration files.
You can also specify a configuration file as a next startup file when you use the save command to save
the running configuration to it.
Examples
# Specify the main next-startup configuration file.
<Sysname> startup saved-configuration testcfg.cfg
Please wait ....
... Done!
Related commands
display startup
138