Boot-Loader Update - HP 6125XLG Command Reference Manual

This command overwrites the entire startup software image list. To add new startup feature images,
specify all feature package files, including feature package files in the old startup software image list.
The new startup software image list will contain only the feature package files that are specified in the
command.
Examples
# Specify flash:/all.ipe as the backup startup image file for IRF member device 1.
<Sysname> boot-loader file flash:/all.ipe slot 1 backup
Images in IPE:
boot.bin
system.bin
This command will set the backup startup software images. Continue? [Y/N]:Y
Add images to target slot.
flash:/boot.bin already exists on slot 1.
flash:/system.bin already exists on slot 1.
Overwrite it? [Y/N]:y
The specified file list will be used as the backup startup software images at the next
reboot on slot 1.
Related commands
display boot-loader

boot-loader update

Use boot-loader update to synchronize startup images from the master to a subordinate device.
Syntax
boot-loader update slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies the IRF member ID of a subordinate device.
Usage guidelines
The startup images synchronized to the subordinate device are set as main startup images, regardless of
whether the source startup images are main or backup.
If the master device has started up with main startup images, its main startup images are synchronized
to the subordinate device, regardless of whether any main startup image has been re-specified.
If the master device has started up with backup startup images, its backup startup images are
synchronized to the subordinate device, regardless of whether any backup startup image has been
re-specified.
Startup image synchronization fails if any software image being synchronized is not available or has
been corrupted.
140