Delete - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
When FTP client debugging is enabled, executing this command disables FTP client debugging.
When FTP client debugging is disabled, executing this command enables FTP client debugging.
Examples
# Enable and then disable FTP client debugging.
ftp> debug
Debugging on (debug=1).
ftp> debug
Debugging off (debug=0).
# When the device serves as the FTP client, enable FTP client debugging and download file a.txt from the
current directory of the FTP server.
ftp> debug
Debugging on (debug=1).
ftp> get a.txt
local: a.txt remote: a.txt
---> EPRT |2|8::124|50198|
200 PORT command successful
---> RETR a.txt
150 Connecting to port 50198
226 File successfully transferred
1569 bytes received in 0.0104 seconds (147.2 kbyte/s)
Table 9 Command output
Field
---> EPRT |2|8::124|50198|
200 PORT command successful
---> RETR a.txt

delete

Use delete to permanently delete a file on the FTP server.
Syntax
delete remotefile
Views
FTP client view
Description
FTP command.
•
2—IPv6 (1 for IPv4).
•
8::124—IPv6 address of the FTP server.
•
50198—Port number of the FTP server.
Received FTP reply code. 200 represents the reply
code, defined in RFC 959.
Downloads file a.txt.
75