Shutdown; Ssh2; System-View - HP 6125XLG Command Reference Manual

shutdown

Use shutdown to shut down the management Ethernet interface.
Use undo shutdown to bring up the management Ethernet interface.
Syntax
shutdown
undo shutdown
Default
The management Ethernet interface is active.
Views
Management Ethernet interface view
Examples
# Shut down the management Ethernet interface.
<boot> system-view
[boot] interface m-eth0
[boot-m-eth0] shutdown
# Activate the management Ethernet interface.
[boot-m-eth0] undo shutdown

ssh2

Use ssh2 to log in to an SSH server.
Syntax
ssh2 { server-ipv4-address | ipv6 server-ipv6-address }
Views
User view
Parameters
server-ipv4-address: Specifies the IPv4 address of the SSH server in dotted decimal notation.
ipv6 server-ipv6-address: Specifies the IPv6 address of the SSH server.
Usage guidelines
If the SSH server does not respond, you can press Ctrl+C to abort the login attempt and try again later.
Examples
# Use SSH to connect to SSH server 192.168.100.128.
<boot> ssh2 192.168.100.128
root@192.168.100.128's password:
Last login: Thu Mar 24 14:05:23 2012 from 192.168.100.199

system-view

Use system-view to switch from user view to system view.
204