Time Once - HP 6125XLG Command Reference Manual

Views
Schedule view
Predefined user roles
network-admin
Parameters
time: Specifies the schedule execution time in the format hh:mm, where hh is in the range of 0 to 23, and
mm is in the range of 0 to 59.
date: Specifies the schedule execution date in the format MM/DD/YYYY or YYYY/MM/DD. The YYYY
value is in the range of 2000 to 2035, the MM value is in the range of 1 to 12, and the value range of
DD depends on the month value.
Usage guidelines
The specified time (date plus time) must be later than the current system time.
The time at command, the time once command, and the time repeating command overwrite one another.
The most recently configured command takes effect.
Examples
# Configure the device to execute schedule saveconfig at 01:01 a.m. on May 1 1, 2013.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time at 1:1 2013/05/11
Related commands
scheduler schedule

time once

Use time once to specify one or more execution days and the execution time for a one-time schedule.
Use undo time to remove the execution time configuration for a schedule.
Syntax
time once at time [ month-date month-day | week-day week-day&<1-7> ]
time once delay time
undo time
Default
No execution time or day is specified for a schedule.
Views
Schedule view
Predefined user roles
network-admin
Parameters
at time: Specifies the execution time in the format hh:mm, where hh is in the range of 0 to 23, and mm
is in the range of 0 to 59.
182