Display This - HP 6125XLG Command Reference Manual

Field
Next backup startup saved-configuration file
Slot n
Related commands
startup saved-configuration

display this

Use display this to display the running configuration in the current view.
Syntax
display this
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Use this command to verify the configuration you have made in a certain view.
Typically, this command does not display parameters that are set to their default settings.
For some parameters that can be successfully configured even if their dependent features are not enabled,
this command displays their settings after the dependent features are enabled.
This command can be executed in any user interface view to display the running configuration of all user
view interfaces.
Examples
# Display the running configuration on interface Ten-GigabitEthernet 1/1/5.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] display this
#
interface Ten-GigabitEthernet1/1/5
#
return
# Display the running configuration on user interfaces.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] display this
#
user-interface aux 0
user-role network-operator
#
Description
Backup startup configuration file to be used at the next startup.
Displays the startup configuration files on member device n.
133