Backup Startup-Configuration; Configuration Encrypt - HP 6125XLG Command Reference Manual

Examples
# Set the maximum number of configuration archives to 10.
<Sysname> system-view
[Sysname] archive configuration max 10
Related commands
archive configuration
•
archive configuration location
•
archive configuration interval
•
display archive configuration
•

backup startup-configuration

Use backup startup-configuration to back up the main next-startup configuration file to a TFTP server.
Syntax
backup startup-configuration to tftp-server [ dest-filename ]
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server: Specifies a TFTP server by its IPv4 address or host name. The host name is a string of 1 to 253
characters.
dest-filename: Specifies the target file name used for saving the file on the server. The file name must use
the .cfg extension. If you do not specify a target file name, the source file name is used.
Usage guidelines
This command is not supported in FIPS mode.
Examples
# Back up the main next-startup configuration file to the TFTP server at 2.2.2.2, and set the target file
name to 192-168-1-26.cfg.
<Sysname> backup startup-configuration to 2.2.2.2 192-168-1-26.cfg
Backup next startup-configuration file to 2.2.2.2, please wait...finished
Related commands
restore startup-configuration

configuration encrypt

Use configuration encrypt to enable configuration encryption.
Use undo configuration encrypt to restore the default.
Syntax
configuration encrypt { private-key | public-key }
125