Display Spbm Interface - HP FlexFabric 5930 Series Command Reference Manual

Field
CSNP received
T1 expirations

display spbm interface

Use display spbm interface to display information about SPBM-enabled interfaces.
Syntax
display spbm interface [ interface-type interface-number ] [ verbose ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, the command displays information about all SPBM-enabled interfaces.
verbose: Displays detailed interface information. If you do not specify this keyword, the command
displays the brief information.
standby slot slot-number: Specifies a subordinate device by its IRF member ID. If you do not specify a
subordinate device, the command displays information for the master device.
Examples
# Display brief information about all SPBM-enabled interfaces.
<Sysname> display spbm interface
Interface
FGE1/0/1
FGE1/0/2
# Display detailed information about all SPBM-enabled interfaces.
<Sysname> display spbm interface verbose
Interface
FGE1/0/1
Hello timer
Hello multiplier
LSP timer
LSP transmitted count : 5
Description
Whether the interface received a CSNP from the neighbor device.
Number of T1 timer expirations on the interface. When this counter reaches
10, the restarting device stops retransmitting hello messages with the RR bit set.
Interface information for SPBM
------------------------------
Circuit ID
1
2
Interface information for SPBM
------------------------------
Circuit ID
1
: 10
: 3
: 33
25
State MTU
Up 1497
Up 1497
State MTU
Up 1497
Cost
10
100
Cost
10