Display Users - HP 6125XLG Command Reference Manual

3 user interfaces used.
33 user interfaces not used.
Table 2 Command output
Fields
number:status

display users

Use display users to display information about the user interfaces that are being used.
Use display users all to display information about all user interfaces that are supported by the device.
Syntax
display users [ all ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Displays information about all user interfaces supported by the device and the user information.
Examples
# Display information about the user interfaces being used.
<Sysname> display users
Idx UI
10 VTY 0
+ 11 VTY 1
Following are more details.
VTY 0 :
Location: 192.168.1.12
VTY 1 :
Location: 192.168.1.26
+ : Current operation user.
F : Current operation user works in async mode.
The output shows that two users have logged in to the device: one is using user interface VTY 0 and the
other is using VTY 1. The one using VTY 0 is at 192.168.1.12 and the other one (yourself) is at
192.168.1.26.
(U)
(X)
Description
The number indicates the absolute number of the first user interface of the user
interface type, starting from 0. The status indicates whether the user interfaces of the
user interface type are being used (X for unused and U for used).
For example, if "20:UUUX XXXX XXXX XXXX" is displayed, there are 16 user
interfaces of the user interface type, which use the absolute numbers 20 through 35.
User interfaces 20 to 22 are being used, and the other user interfaces are not.
Idle Time
00:10:49 Jun 11 11:27:32
00:00:00 Jun 11 11:39:40
Pid Type
320 TEL
334 TEL
20